Mootrack Systems

• High transmit efficiency, low transmit delay.
• Provide 1*V.35 channels and 2*10/100Base-TX and 1*100Base-FX interface.
• The length of Ethernet packet can be set, supporting huge packet. User can select IP protocol encapsulation or simplicity Ethernet type.
• Support VLAN setting,Ethernet ping function.
• Support package loss indicator function for V.35 transmission line.
• Have three Loop Back Mode: Ethernet interface Loop Back (ANA) 、
• V.35 interface Loop Back(DIG) 、 Command the remote V.35 interface Loop Back(REM) Have pseudo random code test function, easily line opened, can be used as a 2M BER Tester V.35 interface supports hot-plug, supports DTE or DCE device interconnection.
• Provide 3 clock types: Internal clock, External clock, slave clock;

• MT-TDMoIP-V.35 is mainly used to transmit V.35 interface over IP network. It has V.35 interface, 2 UTP Ethernet port and 1*fiber Ethernet port. MT-TDMoIP-V.35 can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the quantity. assures connecting to physical V.35 interface of any device seamlessly, It can be used in the communication system based on V.35, such as LAN, WAN, MAN and wireless network.

  More Features : 

  • Point to point or point to multi-points connections, satisfying different applications.
  • High efficiency transmission, up to 90% bandwidth utility ratio.
  • 10/100M Ethernet, full/half duplex auto-adapt, support auto-MDIX.
  • When selecting network adaptation clock, it can resume the original clock accurately through TDM clock resumption mechanism, stable clock, little jitter and small excursion, conforming to ITU-T clock jitter and excursion standard.
  • The device Support WEB management platform, online software upgrades, the host side can manage the work of each state machine equipment.

Additional Information:

• Item Code: MT-847
• Production Capacity: 100
• Delivery Time: 1 week

Features

• Based on self -copyright IC
• To achieve Ethernet data transparent transmission in 1-4E1 circuits
• Can realize the local and the remote device reset
• Ethernet Interface is 100BASE-FX, support VLAN protocol
• Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering function
• Single Channel lines rate is 1984Kbit/s, 4Channel Bandwidth is up to 7936Kbit/s Channel 10M/100M Ethernet interface can isolate each other to realize communication independently
• Ethernet interface supports10M/100M, half/full duplex auto- adaptable and AUTOMDIX (crossed line and straightly connected line self-adaptable )
• CRC automatic alarm threshold can be set to isolate the poor quality transmission lines and cut off a single-direction. When 2M branch circuit onedirection error rate exceeds threshold, cutting off this direction the other direction is not affected; that is to say, both of the Ethernet directiontransmission can be asymmetric
• Allow 4-Channel E1 transmission time delay difference 100ms. When the margin exceed the allowed range, the system can automatically stop on the E1 that time delay is too large to send data
• E1 interface conform to ITU-T G.703, G.704 and G.823, not support the use of signal timeslot
• E1 interface module with inter-set clock recovery circuit and HDB3 code circuit
• Support E1 channel hot-plug in the device, and automatically detects the effective E1 channel and will not interrupt data transmission

Product Features

 Integrated Intel®Skylake-U I5 6360U dual-core four-thread processor

 2*DDR4 SODIMM memory slot, support dual-channel 2133MHz memory, 

maximum support 32GB

 Support independent dual display, 1*HDMI and 1*VGA display output

 Support 2* WGI211AT gigabit network card, support Wake on LAN, PXE function

 Support 6* DB9 RS232 serial interface, COM3~COM6 support RS232/RS485 

switch function

 Support 1*12PIN phoenix terminal, four-in and four-out GPIO, switch, 5V

 Support 4*USB3.0 interface, 4*USB2.0 interface

 Support wide power supply  

 All-aluminum Alloy Fanless design

Additional Information:

• Item Code: MT-1254
• Production Capacity: 100
• Delivery Time: IMMEDIATELY

Functions MT-E1-V.35 converter provides conversion between ITU-T G.703 standard E1 interface and V.35 port, and provides safe and seamless connection of communication between different devices with different interfaces. Data interface mode is DCE, can connect with DTE or DCE device. Features ??? Monitoring remote device from local device (having 2 row indicator LED, upper indicates local, lower indicates remote??? ??? Based on self copyright IC. ??? Provides many kinds of clock ways: E1 master clock, and E1 line clock, V.35 master clock, V.35 external clock. ??? Having 3 loop back functions: E1 local loop, V.35 local loop, and let remote V.35 loop. ??? Having pseudo random code test function, can used as a 2M Protocol Analyzer ??? Support 120Ω/balance and 75Ω/unbalance impedance at the same time. ??? V.35 port supports hot plug, can connect with DTE or DCE. E1 interface Standard: compatible with G.703 standard. Rate: 2.048Mbps Coding: HDB3 Impedance: 75Ω (unbalance) and 120Ω (balance) Connector: BNC (75Ω), RJ45 (120Ω) Jitter Performance: According to G.742 and G.823 Clock: internal clock, Recovery clock. V.35 interface Interface:compatible with V.35 standard. Connector: DB15 Connect mode: DCE Clock: G.703 recovery clock, internal clock, V.35 external clock.

Additional Information:

• Item Code: MT-5120
• Production Capacity: 1000
• Delivery Time: Immediately

Additional Information:

• Delivery Time: Immediately