![]() |
Mootrack Systems Madiwala, Bengaluru, Karnataka |
Approx. Rs 3,999 / Piece Get Latest Price
Minimum Order Quantity | 1 Piece |
Brand | mootek |
1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
3. Supports full /half duplex, Point-to-point transparent transfer
4. Power External 5VDC input
5. Plug-and-play, easy to installation
6. Can insert to 2U 19", 14 slots Rackmount
Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
RJ45 port rate: 10/100Mbps auto negotiation
Optic port rate: 100Mbps
Working: Asynchronous, point to point
Transfer distance: RJ45port: 100m
Fiber optic:20,40,60,80,100,120km(SM), 2 km(MM) optional
RJ45 port cable: UTP 5E
Fiber connector: SC, ST, FC optional
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
Muti-Mode:50/125,62.5/125 um
Wavelength:850nm,1310nm,1550nm
Power
Power supply: External 5VDC input
Consumption: 4W
Environment
Operating temp:-10°C to 65°C
Storage temperature: -20 to 70°C
Operating humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 94.0×71.0×26.0mm(external power supply)
Shell: Iron
Color: White
Weight: 230g(external power supply)
Approx. Rs 4,000 / Piece Get Latest Price
Ethernet-Fiber Converters enable connections of UTP copper-based ethernet equipment over a fiber optic link to take advantage of the benefits of fiber which include;
Copper-based Ethernet connections are limited to a data transmission distance of only 100 meters when using unshielded twisted pair ( UTP ) cable. By using an ethernet to fiber conversion solution, fiber optic cabling can now be used to extend this link over a greater distance.
An Ethernet to Fiber Media Converter can also be used where there is high level of electromagnetic interference or EMI which is a common phenomenon found in industrial plants. This interference can cause corruption of data over copper-based ethernet links. Data transmitted over fiber optic cable however is completely immune to this type of noise. An Ethernet to Fiber Optic Converter therefore enables you to inter-connect your copper-ethernet devices over fiber ensuring optimal data transmission across the plant floor.
By utilizing ethernet to fiber media converters, the benefits of fiber optic cabling
can now be realized for copper–based ethernet infrastructures.
Approx. Rs 5,300 / Piece Get Latest Price
Minimum Order Quantity | 1 Piece |
Brand | Mootek |
1.Adopt 32 bit ARM processor
2.Support 3-in-1 RS-232/RS-485/RS-422 serial interface
3.Support 10/100M
4.Support 300bps-115.2Kbps
5.Support TCP, UDP, ARP, ICMP, HTTP and DHCP protocol
6.Support across gateway, router communication
7.Support standard TCP/IP SOCKET
8.Support Windows serial interface driver mode
9.Support Virtual serial driver access and auto connect once the network disconnect
10.Support network and serial interface configuration mode
11.Low consumption design
12.Support DIN-Rail or wall mounting installation
13.Working termperature: -40~75℃
LAN:
Standard: 10Base-T,100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP protocol
Signal: Rx+,Rx-,Tx+,Tx-
Speed: 10/100Mbps
Working: Full-duplex and half-duplex
Working mode: Support Server and Client
Transmission; 100m
Connector: RJ45
Serial interface:
Serial interface number: 1 port RS-232,1 port RS-422/485
RS-232 signal: TXD,RXD,RTS,CTS,DTR,DSR,GND
RS-422 signal: T+(A),T-(B),R+(A),R-(B),GND
RS-485 signal: D+(A),D-(B),GND
Parity bit: None,Even,Odd,Space,Mark
Data bit: 5bit,6bit,7bit,8bit
Baud rate: 300bps~115200bps
Flow control: RTS/CTS or XON/XOFF
Direction control: RS485 side adopt ADDC technology, auto text and control data transfer direction
Loading: RS-485/422 side support 32 nodes (customize 128 nodes) loopback
Transmission: RS-485/422 side 1200m; RS-232 side 15m
Interface protection: 1500W surge protection, 15KV static protection
Interface type: RS-232 side DB9 male,RS-485/422 side 5 bit terminal block
Power supply:
Power input: 12VDC(9~48VDC)
Consumption: Approx 1.4W
Approx. Rs 13,500 / Piece Get Latest Price
Minimum Order Quantity | 1 Piece |
Brand | Mootek |
1.Support 10/100M Ethernet
2.Support 8 Port RS-485/422
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and
Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
13.Working temperature: -40~85℃
Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: Support TCP Server and Client
Transfer distance: 100m
Connector: RJ45
RS-485/422 port
RS-485/422 port number: 8
RS-422 signal: T+(A), T-(B), R+(A), R-(B)
RS-485 signal: D+(A), D-(B)
Parity bit: None, Even, Odd, Space, Mark
Data bit; 5bit,6bit,7bit,8bit
Stop bit: 1bit,1.5bit,2bit
Band rate: 300bps~115200bps
Loading: support 32 nodes loop back
Transfer distance: 1200m
Connector:4-bit terminal block
Protection: class 3 static, 1.5KVAC isolation
LED Indicator
Working statue indicator: RUN
Power (PWR)
Ethernet port connection statue (Link)
RS-485/422 port transmit data indicator: TX1~TX8
RS-485/422 port receive data indicator: RX1~RX8
Power supply
Input voltage: 12VDC(9~48VDC)
No-load consumption: 1.81W@5VDC
Full-load consumption: 2.36W@5VDC
Environment limits
Working temperature: -40~85℃
Storage temperature: -40~85℃
Relative humidity: 5%~95%(non-condensing)
Approx. Rs 6,999 / Piece Get Latest Price
Brand | Mootek |
1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
3. Supports full /half duplex, Point-to-point transparent transfer
4. Power External 5VDC input
5. Plug-and-play, easy to installation
6. Can insert to 2U 19", 14 slots Rackmount
Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
RJ45 port rate: 10/100Mbps auto negotiation
Optic port rate: 100Mbps
Working: Asynchronous, point to point
Transfer distance: RJ45port: 100m
Fiber optic:20,40,60,80,100,120km(SM), 2 km(MM) optional
RJ45 port cable: UTP 5E
Fiber connector: SC, ST, FC optional
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
Muti-Mode:50/125,62.5/125 um
Wavelength:850nm,1310nm,1550nm
Power
Power supply: External 5VDC input
Consumption: 4W
Environment
Operating temp:-10°C to 60°C
Storage temperature: -20 to 70°C
Operating humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 94.0×71.0×26.0mm(external power supply)
Shell: Iron
Color: White
Weight: 230g(external power supply)
Warranty: 3 years
Approvals: FCC,CE, RoHS approvals
Approx. Rs 6,999 / Piece Get Latest Price
Brand | mootek |
1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
3. Supports full /half duplex, Point-to-point transparent transfer
4. Support WEB, SNMP, TELNET management, upgraded online via TFTP
5. The module must be inserted into 2U 19", 17 slots Rack mount, RACK2000C
6. Manageable stand-alone media converters in remote end
View manageable system supports full range of standards such as HTTP,SNMP,TFTP,TELNET …etc . The system has proper interface for each.
1. Support WEB based management
Our manageable system supports the management based on WEB. It is easy to be understood and used, no need install special software, so that it is easier for the users.
2. Support SNMP management
Fully support SNMP, the users can manage the relational devices via any operating system, such as HP-OpenView .
3. Support Console management when emergency
Support local command-string management via Console port , the users can manage the devices via other networks such as Telephone System , in case the Ethernet networks failed .
4. Support TELNET
5. The software can be upgraded online via TFTP.
SpecificationStandard
comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
Interface
Console port: RS232(RJ45)
RJ45 port rate: 10/100Mbps auto negotiation
Optic port rate: 100Mbps
Working: Asynchronous, point to point
Transfer distance: RJ45port: 100m
Fiber optic:20,40,60,80,100,120km(SM),
2 km(MM) optional
RJ45 port cable: UTP 5E
Fiber connector: SC, ST, FC optional
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
Muti-Mode:50/125,62.5/125 um
Wavelength:850nm,1310nm,1550nm
Power
Power supply: External 5VDC input
Consumption: 4W
Environment
Operating temp:-10°C to 65°C
Storage temperature: -20 to 70°C
Operating humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 94.0×71.0×26.0mm(stand-alone)
Shell: Iron
Color: White
Weight: 230g(power external)
Warranty: 3 years
Approvals: FCC,CE, RoHS approvals
Approx. Rs 6,000 / Piece Get Latest Price
Brand | mootek |
1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
3. Supports full /half duplex, Point-to-point transparent transfer
4. Support WEB, SNMP, TELNET management, upgraded online via TFTP
5. The module must be inserted into 2U 19", 17 slots Rack mount, RACK2000C
6. Manageable stand-alone media converters in remote end
View manageable system supports full range of standards such as HTTP,SNMP,TFTP,TELNET …etc . The system has proper interface for each.
1. Support WEB based management
Our manageable system supports the management based on WEB. It is easy to be understood and used, no need install special software, so that it is easier for the users.
2. Support SNMP management
Fully support SNMP, the users can manage the relational devices via any operating system, such as HP-OpenView .
3. Support Console management when emergency
Support local command-string management via Console port , the users can manage the devices via other networks such as Telephone System , in case the Ethernet networks failed .
4. Support TELNET
5. The software can be upgraded online via TFTP.
SpecificationStandard
comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
Interface
Console port: RS232(RJ45)
RJ45 port rate: 10/100Mbps auto negotiation
Optic port rate: 100Mbps
Working: Asynchronous, point to point
Transfer distance: RJ45port: 100m
Fiber optic:20,40,60,80,100,120km(SM),
2 km(MM) optional
RJ45 port cable: UTP 5E
Fiber connector: SC, ST, FC optional
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
Muti-Mode:50/125,62.5/125 um
Wavelength:850nm,1310nm,1550nm
Power
Power supply: External 5VDC input
Consumption: 4W
Environment
Operating temp:-10°C to 65°C
Storage temperature: -20 to 70°C
Operating humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 94.0×71.0×26.0mm(stand-alone)
Shell: Iron
Color: White
Weight: 230g(power external)
Approx. Rs 6,000 / Piece Get Latest Price
Minimum Order Quantity | 1 Piece |
Brand | mootek |
1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
3. Supports full /half duplex, Point-to-point transparent transfer
4. Power External 5VDC input
5. Plug-and-play, easy to installation
6. Can insert to 2U 19", 14 slots Rackmount
Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
RJ45 port rate: 10/100Mbps auto negotiation
Optic port rate: 100Mbps
Working: Asynchronous, point to point
Transfer distance: RJ45port: 100m
Fiber optic:20,40,60,80,100,120km(SM), 2 km(MM) optional
RJ45 port cable: UTP 5E
Fiber connector: SC, ST, FC optional
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
Muti-Mode:50/125,62.5/125 um
Wavelength:850nm,1310nm,1550nm
Power
Power supply: External 5VDC input
Consumption: 4W
Environment
Operating temp:-10°C to 60°C
Storage temperature: -20 to 70°C
Operating humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 94.0×71.0×26.0mm(external power supply)
Shell: Iron
Color: White
Weight: 230g(external power supply)
Warranty: 3 years
Approvals: FCC,CE, RoHS approvals
Approx. Rs 6,000 / Piece Get Latest Price
Brand | Mootek |
1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
3. Supports full /half duplex, Point-to-point transparent transfer
4. With one SFP slot
5. Plug-and-play, easy to installation
6. Can insert to 2U 19", 14 slots Rackmount
Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
RJ45 port rate: 10/100Mbps auto negotiation
Optic port rate: 100Mbps
Working: Asynchronous, point to point
Transfer distance: RJ45port: 100m
Fiber optic:20,40,60,80,100,120km(SM), 2 km(MM) optional
RJ45 port cable: UTP 5E
Fiber connector: LC
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
Muti-Mode:50/125,62.5/125 um
Wavelength:850nm,1310nm,1550nm
Power
Power supply: External 5VDC input
Consumption: 4W
Environment
Operating temp:-10°C to 65°C
Storage temperature: -20 to 70°C
Operating humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 94.0×71.0×26.0mm(external power supply)
Shell: Iron
Color: White
Weight: 230g(external power supply)
Warranty: 3 years
Approvals: FCC,CE, RoHS approvals
Approx. Rs 6,000 / Piece Get Latest Price
NP302T-2D(RS-485) is an high performance, industrial grade serial to Ethernet server, it can satisfy some kinds of customer requirements in consumption, temperature, volume and handle ability. It provides 2 port RS-485/422(RS-485/422 connector: 5 bit terminal block) and 1 port 10/100Base-Tx Ethernet, can focus manage disperse serial device, master through network, easy, convenience. In application, can configure, upgrade through WEB.1.Support 10/100M Ethernet
2.Support 2 Port RS-485/422
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and
Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
Approx. Rs 14,300 / Piece Get Latest Price
Minimum Order Quantity | 1 Piece |
Brand | Mootek |
1.Support 10/100M Ethernet
2.Support 4 Port RS-485/422
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and
Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
13.Working temperature: -40~85℃
Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: Support TCP Server and Client
Transfer distance: 100m
Connector: RJ45
RS-485/422 port
RS-485/422 port number: 4
RS-422 signal: T+(A), T-(B), R+(A), R-(B)
RS-485 signal: D+(A), D-(B)
Parity bit: None, Even, Odd, Space, Mark
Data bit; 5bit,6bit,7bit,8bit
Stop bit: 1bit,1.5bit,2bit
Band rate: 300bps~115200bps
Loading: support 32 nodes loop back
Transfer distance: 1200m
Connector:4-bit terminal block
Protection: class 3 static, 1.5KVAC isolation
LED Indicator
Working statue indicator: RUN
Power (PWR)
Ethernet port connection statue (Link)
RS-485/422 port transmit data indicator: TX1~TX4
RS-485/422 port receive data indicator: RX1~RX4
Power supply
Input voltage: 12VDC(9~48VDC)
No-load consumption:1.35W@12VDC
Full-load consumption: 1.44W@12VDC
Environment limits
Working temperature: -40~85℃
Storage temperature: -40~85℃
Relative humidity: 5%~95%(non-condensing)
Mechanical
Shell: IP30 protection, metal shell
Installation: Wall mounting
Weight: 450g
Size (L×W×H): 160mm×95.5mm×28mm
Approx. Rs 4,000 / Piece Get Latest Price
Brand | Mootek |
Approx. Rs 4,000 / Piece Get Latest Price
SpecificationsBrand Name:3one dataModel Number:IES615-2D(RS-485)Place of Origin:Tamil Nadu, IndiaApprox. Rs 3,400 / Piece Get Latest Price
Minimum Order Quantity | 1 Piece |
Number of Ports/Pins | 1 port |
Model Name/Number | Model 3012 |
1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
3. Supports full /half duplex, Point-to-point transparent transfer
4. With one SFP slot
5. Plug-and-play, easy to installation
6. Can insert to 2U 19", 14 slots Rackmount
Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
RJ45 port rate: 10/100Mbps auto negotiation
Optic port rate: 100Mbps
Working: Asynchronous, point to point
Transfer distance: RJ45port: 100m
Fiber optic:20,40,60,80,100,120km(SM), 2 km(MM) optional
RJ45 port cable: UTP 5E
Fiber connector: LC
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
Muti-Mode:50/125,62.5/125 um
Wavelength:850nm,1310nm,1550nm
Power
Power supply: External 5VDC input
Consumption: 4W
Environment
Operating temp:-10°C to 65°C
Storage temperature: -20 to 70°C
Operating humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 94.0×71.0×26.0mm(external power supply)
Shell: Iron
Color: White
Weight: 230g(external power supply)
Approx. Rs 3,999 / Piece Get Latest Price
The Media Converter complies with IEEE802.3, IEEE802.3u, IEEE802.3x Standards. It is designed to convert data signal between 10/100 Base-TX and 100Base-FX fast Ethernet. It supports 10/100Base-TX and 100Base-FX applications. The data signal converted by such high performance media converter can be transmitted up to 120Km maximum by fiber-optical cable. The Converter is equipped one optic port and two RJ45 Jacks and one external power supply receptacle. Four LED indicators are built-in for easy diagnosing and monitoring the status of. It can be configured automatically for Full Duplex or Half Duplex operation.1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
3. Supports full /half duplex, Point-to-point transparent transfer
4. Power External 5VDC input
5. Plug-and-play, easy to installation
Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
RJ45 port rate: 10/100Mbps auto negotiation
Optic port rate: 100Mbps
Working: Asynchronous, point to point
Transfer distance: RJ45port: 100m
Fiber optic:20,40,60,80,100,120km(SM), 2 km(MM) optional
RJ45 port cable: UTP 5E
Fiber connector: SC, ST, FC optional
Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
Muti-Mode:50/125,62.5/125 um
Wavelength:850nm,1310nm,1550nm
Power
Power supply: External 5VDC input
Consumption: 4W
Environment
Operating temp:-20°C to 75°C
Storage temperature: -20 to 70°C