Ethernet serial converter

Approx. 6,500 / Piece Get Latest Price

Product Brochure

NP301 is the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. The product supports 1 RS-232/RS-422 /RS-485 to 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes.

 

Serial device server supports multiple network protocols, such as TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server, Advanced UDP operating modes and AT, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

 

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits

 

 Adopt 32 bits ARM processor

 Support 10/100Base-T(X) self-adaptive Ethernet interface

 Support AUTO MDI/MDIX, which can be connected via crossover cable and straight-through cable

 Support 300bps-115200bps line speed and non-blocking communication

 Support low power consumption mode and high performance mode

 Support TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server and Advanced UDP operating mode

 Support AT command, which is convenient for the secondary development of users

 Support DNS, which can achieve communication via domain name

 Support across gateway and routing communication

 Support virtual serial port drive access mode and automatic connection recovery after network interruption

 Flexible serial port data framing setting, which can satisfy user's various demands for data packets segmentation

 Support standard TCP/IP SOCKET application access

 TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously

 UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously

 Support Windows configuration tool, serial port, WEB and other configuration forms

 

 Support local and remote system firmware upgrading

Approx. 7,000 / Piece Get Latest Price

MODEL277 series are serial-to-fiber modems that convert RS-232/485/422 serial port signal to optical signal. This series include 3 types of optional products and support 1 RS-232, RS-485/422 or 3IN1 serial port to 1 fiber port. It adopts wall mounting or DIN-Rail mounting to meet the requirements of different application scenes. This series adopt advanced communication coding and clock recovery technology to avoid data transmission error. And it adopts unique "Zero time delay and automatic forwarding" technology to enhance the anti-interference capability of interface and achieve real zero time delay. It can conduct automatic detection of baud rate, even the baud rate of the device serial signal changes; the converter can still achieve RS-232 or RS-485/422 to optical port conversion. MODEL277 series can be widely used in various industrial control, process control, traffic control, intelligent community and other scenes, especially suitable for bank, power industry, departments and systems with special requirements for electromagnetic interference.
 Support 1 RS-232, RS-485/422 or 3IN1 serial port to 1 fiber port  Support advanced communication coding and clock recovery technology to ensure accurate transmission of distant data  Support unique "Zero time delay and automatic forwarding" technology Support autotunning technology of serial baud rate Support 5VDC, 12-48VDC, -48VDC and 220VAC four power supply solutions Support 1 RS-232, RS-485/422 or 3IN1 serial port to 1 fiber port  Support advanced communication coding and clock recovery technology to ensure accurate transmission of distant data Support unique "Zero time delay and automatic forwarding" technology  Support autotunning technology of serial baud rate  Support 5VDC, 12-48VDC, -48VDC and 220VAC four power supply solutions

Approx. 9,500 / Piece Get Latest Price

Product Brochure

NP302T is the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. The product supports 1 RS-232/RS-422 /RS-485 to 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes.

 

Serial device server supports multiple network protocols, such as TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server, Advanced UDP operating modes and AT, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

 

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

 

Features and Benefits

 

 Adopt 32 bits ARM processor

 Support 10/100Base-T(X) self-adaptive Ethernet interface

 Support AUTO MDI/MDIX, which can be connected via crossover cable and straight-through cable

 Support 300bps-115200bps line speed and non-blocking communication

 Support low power consumption mode and high performance mode

 Support TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server and Advanced UDP operating mode

 Support AT command, which is convenient for the secondary development of users

 Support DNS, which can achieve communication via domain name

 Support across gateway and routing communication

 Support virtual serial port drive access mode and automatic connection recovery after network interruption

 Flexible serial port data framing setting, which can satisfy user's various demands for data packets segmentation

 Support standard TCP/IP SOCKET application access

 TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously

 UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously

 Support Windows configuration tool, serial port, WEB and other configuration forms

 Support local and remote system firmware upgrading

Approx. 12,500 / Piece Get Latest Price

Product Brochure

Features

1.Support 10/100M Ethernet
2.Support 4 Port RS-232
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and 
Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication    
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
13.Working temperature: -40～85℃

 Specification

Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: Support TCP Server and Client
Transfer distance: 100m
Connector: RJ45
RS-232 port
RS-232 port number: 4
RS-232 signal: DCD, RXD, TXD, DTR, GND, DSR,  RTS, CTS
Parity bit: None, Even, Odd, Space, Mark
Data bit: 5bit, 6bit, 7bit, 8bit
Stop bit: 1bit, 1.5bit, 2bit
Band rate: 300bps～115200bps
Loading: point to point
Transfer distance: no more than 15m
Connector: RJ45
Protection: class 4 static
LED Indicator
Working statue indicator: RUN
Power (PWR)
Ethernet port connection statue (Link)
RS232 port transmit data indicator: TX1~TX4
RS232 port receive data indicator: RX1~RX4
Power supply
Input voltage: 12VDC(9~48VDC)
No-load consumption:1.05W@12VDC
Full-load consumption: 1.16W@12VDC
Environment limits
Working temperature: -40~85℃
Storage temperature: -40~85℃
Relative humidity: 5%~95%（non-condensing）
Mechanical
Shell: IP30 protection, metal shell
Installation: Wall mounting
Weight: 460g
Size (L×W×H): 160mm×95.5mm×28mm
Standard
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024,
          EN 61000-4-2 (ESD) Level 3,
          EN 61000-4-3 (RS) Level 3,
          EN 61000-4-4 (EFT) Level 4,
          EN 61000-4-5 (Surge) Level 3,
          EN 61000-4-6 (CS) Level 3,
          EN 61000-4-8,
          EN 61000-4-11
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6 
Warranty
Warranty time: 3 years
Certificates
CE, FCC, RoHS, UL508(pending)

Approx. 6,700 / Piece Get Latest Price

Product Brochure

NP301 is the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. The product supports 1 RS-232/RS-422 /RS-485 to 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes.

 

Serial device server supports multiple network protocols, such as TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server, Advanced UDP operating modes and AT, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

 

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

 

Features and Benefits

 

 Adopt 32 bits ARM processor

 Support 10/100Base-T(X) self-adaptive Ethernet interface

 Support AUTO MDI/MDIX, which can be connected via crossover cable and straight-through cable

 Support 300bps-115200bps line speed and non-blocking communication

 Support low power consumption mode and high performance mode

 Support TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server and Advanced UDP operating mode

 Support AT command, which is convenient for the secondary development of users

 Support DNS, which can achieve communication via domain name

 Support across gateway and routing communication

 Support virtual serial port drive access mode and automatic connection recovery after network interruption

 Flexible serial port data framing setting, which can satisfy user''s various demands for data packets segmentation

 Support standard TCP/IP SOCKET application access

 TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously

 UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously

 Support Windows configuration tool, serial port, WEB and other configuration forms

 Support local and remote system firmware upgrading

Approx. 6,500 / Piece Get Latest Price

Product Brochure
Model : NP301NP301 serial device server is designed to make your serial devices internet ready instantly. It provides 1 port RS232/485/422 (RS232, DB9M; RS485/422, 5 bit terminal block) and 1 port 10/100Base-T(X).It makes them ideal choice for connecting decentral serial devices and Host computer to an IP based Ethernet, making it easily and conviniently for your management. Its software can be setting and updating by serial program group in the application. It supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM, LLF functions.

Features

1.Adopt 32 bit ARM processor
2.Support 3-in-1 RS-232/RS-485/RS-422 serial interface
3.Support 10/100M
4.Support 300bps-115.2Kbps
5.Support TCP, UDP, ARP, ICMP, HTTP and DHCP protocol
6.Support across gateway, router communication
7.Support standard TCP/IP SOCKET
8.Support Windows serial interface driver mode
9.Support Virtual serial driver access and auto connect once the network disconnect
10.Support network and serial interface configuration mode
11.Low consumption design
12.Support DIN-Rail or wall mounting installation
13.Working temperature: -40deg 75det

 Specification

LAN
Standard: 10Base-T100Base-TX
Protocol: Support  TCP, UDP, APR, ICMP and DHCP protocol
Signal: Rx+,Rx-,Tx+,Tx-
Speed: 10/100Mbps
Working: Full-duplex and half-duplex
Working mode: Support Server and Client
Transmission; 100m
Connector: RJ45

Serial interface:
Serial interface number: 1 port RS-232,1 port RS-422/485
RS-232 signal: TXD,RXD,RTS,CTS,DTR,DSR,GND 
RS-422 signal: T+???A???,T-(B),R+(A),R-(B),GND
RS-485 signal: D+???A???,D-(B),GND
Parity bit: None,Even,Odd,Space,Mark
Data bit: 5bit,6bit,7bit,8bit
Baud rate: 300bps???115200bps
Flow control: RTS/CTS or XON/XOFF
Direction control: RS485 side adopt ADDC technology, auto text and control data transfer direction
Loading: RS-485/422 side support 32 nodes (customize 128 nodes) loopback
Transmission: RS-485/422 side 1200m; RS-232 side 15m
Interface protection: 1500W surge protection, 15KV static protection
Interface type: RS-232 side DB9 male???RS-485/422 side 5 bit terminal block

Power supply:
Power input: 12VDC(9~48VDC)
Consumption: Approx 1.4W

Approx. 9,500 / Piece Get Latest Price

Product Brochure

NP302T series are the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series include 2 types of products and provide 2 RS-232 or RS-485/422 to 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes.

 

Serial device server supports multiple network protocols, such as TCP, UDP, SNMP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast operating modes and TELNET, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

 

DIP switch can achieve restore factory defaults of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

 

Features and Benefits

 

 Support 10/100Base-T(X) self-adaptive Ethernet interface

 Support 300bps-115200bps line speed and non-blocking communication

 Support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes

 Support across gateway and routing communication

 Support multiple hosts polling mode, which allows multiple hosts to access the same serial port

 Support delimiter matching communication, achieving various demands for serial port packaging

 Support FIFO, compatible with various old type terminal devices

 Support IP address and MAC address filtering, which can easily achieve accurate access control

 Support classification of user management to realize humanized permission management

 Support serial port status and parameters monitoring, ensuring the communication status be clear at a glance

 Support RTS/CTS, DTR/DSR and XON/XOFF flow control

 Support SNMP network management

 Compatible with various virtual serial port management software

 Support virtual serial port drive access mode and automatic connection recovery after network interruption

 Flexible serial port data framing setting, which can satisfy user various demands for data packets segmentation

 Support standard TCP/IP SOCKET application access

 TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously

 UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously

 Support Windows configuration tool, TELNET, WEB and other configuration forms

Approx. 6,300 / Piece Get Latest Price

Product Brochure
Model : NP301NP301 serial device server is designed to make your serial devices internet ready instantly. It provides 1 port RS232/485/422 (RS232, DB9M; RS485/422, 5 bit terminal block) and 1 port 10/100Base-T(X).It makes them ideal choice for connecting decentral serial devices and Host computer to an IP based Ethernet, making it easily and conviniently for your management. Its software can be setting and updating by serial program group in the application. It supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM, LLF functions.

Features

1.Adopt 32 bit ARM processor
2.Support 3-in-1 RS-232/RS-485/RS-422 serial interface
3.Support 10/100M
4.Support 300bps-115.2Kbps
5.Support TCP, UDP, ARP, ICMP, HTTP and DHCP protocol
6.Support across gateway, router communication
7.Support standard TCP/IP SOCKET
8.Support Windows serial interface driver mode
9.Support Virtual serial driver access and auto connect once the network disconnect
10.Support network and serial interface configuration mode
11.Low consumption design
12.Support DIN-Rail or wall mounting installation
13.Working termperature: -40 75

 Specification

LAN
Standard: 10Base-T100Base-TX
Protocol: Support  TCP, UDP, APR, ICMP and DHCP protocol
Signal: Rx+,Rx-,Tx+,Tx-
Speed: 10/100Mbps
Working: Full-duplex and half-duplex
Working mode: Support Server and Client
Transmission; 100m
Connector: RJ45

Serial interface:
Serial interface number: 1 port RS-232,1 port RS-422/485
RS-232 signal: TXD,RXD,RTS,CTS,DTR,DSR,GND 
RS-422 signal: T+???A???,T-(B),R+(A),R-(B),GND
RS-485 signal: D+???A???,D-(B),GND
Parity bit: None,Even,Odd,Space,Mark
Data bit: 5bit,6bit,7bit,8bit
Baud rate: 300bps???115200bps
Flow control: RTS/CTS or XON/XOFF
Direction control: RS485 side adopt ADDC technology, auto text and control data transfer direction
Loading: RS-485/422 side support 32 nodes (customize 128 nodes) loopback
Transmission: RS-485/422 side 1200m; RS-232 side 15m
Interface protection: 1500W surge protection, 15KV static protection
Interface type: RS-232 side DB9 male???RS-485/422 side 5 bit terminal block

Power supply:
Power input: 12VDC(9-48VDC)
Consumption: Approx 1.4W

Approx. 9,500 / Piece Get Latest Price

CAN485 is used for data exchange between CAN-Bus field bus and RS-485 bus interface converter, and supports Modbus RTU protocol. CAN485 interface converter integrated a RS-485 channel and a CAN-Bus channel can be easily embedded using RS-485 interface for communication nodes, do not need to change the original hardware architecture enables the device to obtain the CAN-Bus communication interface, to achieve between the equipments of RS-485 and CAN-Bus network connection and data communication. RS-485 channel CAN485 devices to support a variety of baud rate, the range is 300bps~115200bps. CAN-Bus channel support CiA recommended a variety of standard baud rate and user-defined baud rate, the range of 2.5Kbps~1Mbps. CAN485 interface converter provides three types of data conversion: transparent conversion, encryption conversion and Modbus protocol conversion. Its exterior design supports DIN-Rail mounting and Wall mounting, which is convenient for engineering application. The board comes with a photoelectric isolation module, complete electrical isolation control circuit and CAN-Bus communication circuit, so that the CAN485 converter has a strong anti-interference ability, greatly improving the system in the harsh environment of the use of reliability.

Features 1. Bidirectional data communication between CAN-Bus and RS-485 2. Support CAN2.0A and CAN2.0B protocol, in compliance with the ISO/DIS 11898 specification 3. Integrated 1 CAN-Bus communication interface, support for user-defined baud rate 4. Integrated 1 RS-485 three pins type communication interface, communication rate between 300~115200bps can be set 5. Provide three kinds of data conversion modes: transparent conversion, transparent with the identity conversion, Modbus protocol conversion 6. CAN-Bus circuit using 2000V AC electrical isolation, support 8KV electrostatic protection (air discharge) 7. CAN-Bus baud rate 2.5k~1Mbps 8. Maximum frame rate: 500 frames per second 9. DC9~48V wide voltage supply input, power supply support reverse connection 10. IP40 protection grade, DIN-Rail or wall mounting installation 11. -40-75working temperature

Approx. 24,000 / Piece Get Latest Price

Product Brochure
Model : NP3016T-16D(RS-232)NP3016T-16D(RS-232) is an high performance, industrial grade serial to Ethernet server, it can satisfy some kinds of customer requirements in consumption, temperature, volume and handle ability. It provides 16 port RS232 (RS-232 connector: RJ45) and 1 port 10/100Base-Tx Ethernet, can focus manage disperse serial device, master through network, easy, convenience. In application, can configure, upgrade through WEB.
Moreover, NP3016T-16D(RS-232) provide strong function configuration tools based in Windows platform, it can guide user configure the device step by step, all configurations are coming true by WEB or Telnet, support cross-gateway and cross-router, user can can flexible configure IP address, server and client mode, data bag size etc.
NP3016T-16D(RS-232) adopts EMC protection design, can work in rugged environment.

Features

1.Support 10/100M Ethernet
2.Support 16 Port RS-232
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and 
  Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication    
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
13.Working temperature: -25～70℃

 Specification

Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: Support TCP Server and Client
Transfer distance: 100m
Connector: RJ45
RS-232 port
RS-232 port number: 16
RS-232 signal: DCD, RXD, TXD, DTR, GND, DSR,  RTS, CTS
Parity bit: None, Even, Odd, Space, Mark
Data bit: 5bit, 6bit, 7bit, 8bit
Stop bit: 1bit, 1.5bit, 2bit
Band rate: 300bps～115200bps
Loading: point to point
Transfer distance: no more than 15m
Connector: RJ45
Protection: class 3 static
LED Indicator
Working statue indicator: RUN
Power (PWR)
Ethernet port connection statue (Link)
RS232 port transmit data indicator: TX1~TX16
RS232 port receive data indicator: RX1~RX16
Power supply
Input Voltage: 85~265VAC/DC
No-load consumption: 1.9W@220VAC
Full-load consumption: 3.4W@220VAC
Mechanical
Shell: IP30 protection, metal shell
Installation: 1U 19” rack mount
Weight: 2500g
Size(L×W×H): 441.6mm×207.9mm×44.6mm 
Environment limits
Working temperature: -25~70℃
Storage temperature: -30~85℃
Relative humidity: 5%~95%（non-condensing）
Standard
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024,
          EN 61000-4-2 (ESD) Level 3,
          EN 61000-4-3 (RS) Level 3,
          EN 61000-4-4 (EFT) Level 4,
          EN 61000-4-5 (Surge) Level 3,
          EN 61000-4-6 (CS) Level 3,
          EN 61000-4-8,
          EN 61000-4-11
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6 
Warranty
Warranty time: 3 years
Certificates
CE, FCC, RoHS, UL508(pending)

Approx. 16,500 / Piece Get Latest Price

Product Brochure

Features

1.Support 10/100M Ethernet
2.Support 8 Port RS-232
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and 
  Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication    
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
13.Working temperature: -40～85℃

 Specification

Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: Support TCP Server and Client
Transfer distance: 100m
Connector: RJ45
RS232 port
RS232 port number: 8
RS-232 signal: DCD, RXD, TXD, DTR, GND, DSR,  RTS, CTS
Parity bit: None, Even, Odd, Space, Mark
Data bit: 5bit, 6bit, 7bit, 8bit
Stop bit: 1bit, 1.5bit, 2bit
Band rate: 300bps～115200bps
Loading: point to point
Transfer distance: no more than 15m
Connector: RJ45
Protection: class 3 static
LED Indicator
Working statue indicator: RUN
Power (PWR)
Ethernet port connection statue (Link)
RS232 port transmit data indicator: TX1~TX8
RS232 port receive data indicator: RX1~RX8
Power supply
Input voltage: 12VDC(9~48VDC)
No-load consumption:1.43W@12VDC
Full-load consumption: 1.98W@12VDC
Environment limits
Working temperature: -40~85℃
Storage temperature: -40~85℃
Relative humidity: 5%~95%（non-condensing）
Mechanical
Shell:  IP30 protection, metal shell
Installation: Wall mounting
Weight: 524g
Size (L×W×H): 160mm×95.5mm×28mm
Standard
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024,

Approx. 13,500 / Piece Get Latest Price

Product Brochure

Features

1.Support 10/100M Ethernet
2.Support 4 Port RS-485/422
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and
Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
13.Working temperature: -40～85℃

Specification

Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: Support TCP Server and Client
Transfer distance: 100m
Connector: RJ45
RS-485/422 port
RS-485/422 port number: 4
RS-422 signal: T+(A), T-(B), R+(A), R-(B)
RS-485 signal: D+(A), D-(B)
Parity bit: None, Even, Odd, Space, Mark
Data bit; 5bit,6bit,7bit,8bit
Stop bit: 1bit,1.5bit,2bit
Band rate: 300bps～115200bps
Loading: support 32 nodes loop back
Transfer distance: 1200m
Connector:4-bit terminal block
Protection: class 3 static, 1.5KVAC isolation
LED Indicator
Working statue indicator: RUN
Power (PWR)
Ethernet port connection statue (Link)
RS-485/422 port transmit data indicator: TX1~TX4
RS-485/422 port receive data indicator: RX1~RX4
Power supply
Input voltage: 12VDC(9~48VDC)
No-load consumption:1.35W@12VDC
Full-load consumption: 1.44W@12VDC
Environment limits
Working temperature: -40~85℃
Storage temperature: -40~85℃
Relative humidity: 5%~95%（non-condensing）
Mechanical
Shell: IP30 protection, metal shell
Installation: Wall mounting
Weight: 450g
Size (L×W×H): 160mm×95.5mm×28mm
Standard
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8,
EN 61000-4-11
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty
Warranty time: 3 years
Certificates
CE, FCC, RoHS, UL508(pending)

Approx. 6,500 / Piece Get Latest Price

NP301 serial device server is designed to make your serial devices internet ready instantly. It provides 1 port RS232/485/422 (RS232, DB9M; RS485/422, 5 bit terminal block) and 1 port 10/100Base-T(X).It makes them ideal choice for connecting decentral serial devices and Host computer to an IP based Ethernet, making it easily and conviniently for your management. Its software can be setting and updating by serial program group in the application. It supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM, LLF functions.
What''s more, NP301 serial devices server provides powerful management configuration tools based on Windows, guiding users’ configuration of the devices step by step. All configurations can be done by network and serial port, supporting communication across gateway and router. In addition, it allows users to configurate flexibly IP address, Server or Client mode, size of packet, etc. NP301 serial device sever is designed with EMC protection, and power supply have overcurrent and overvoltage protection. These make it woking stably in hazardous environment. Easy wall and DIN-Rail mounting

Approx. 15,000 / Piece Get Latest Price

Product Brochure

Features

1.Support 10/100M Ethernet
2.Support 8 Port RS-485/422
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and 
  Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication    
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
13.Working temperature: -40～85℃

 Specification

Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: Support TCP Server and Client
Transfer distance: 100m
Connector: RJ45
RS-485/422 port
RS-485/422 port number: 8
RS-422 signal: T+(A), T-(B), R+(A), R-(B)
RS-485 signal: D+(A), D-(B)
Parity bit: None, Even, Odd, Space, Mark
Data bit; 5bit,6bit,7bit,8bit
Stop bit: 1bit,1.5bit,2bit
Band rate: 300bps～115200bps
Loading: support 32 nodes loop back
Transfer distance: 1200m
Connector:4-bit terminal block
Protection: class 3 static, 1.5KVAC isolation
LED Indicator
Working statue indicator: RUN
Power (PWR)
Ethernet port connection statue (Link)
RS-485/422 port transmit data indicator: TX1~TX8
RS-485/422 port receive data indicator: RX1~RX8
Power supply
Input voltage: 12VDC(9~48VDC)
No-load consumption: 1.81W@5VDC
Full-load consumption: 2.36W@5VDC
Environment limits
Working temperature: -40~85℃
Storage temperature: -40~85℃
Relative humidity: 5%~95%（non-condensing）
Mechanical
Shell:  IP30 protection, metal shell
Installation: Wall mounting
Weight: 486g
Size (L×W×H): 160mm×95.5mm×28mm
Standard
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024,
          EN 61000-4-2 (ESD) Level 3,
          EN 61000-4-3 (RS) Level 3,
          EN 61000-4-4 (EFT) Level 4,
          EN 61000-4-5 (Surge) Level 3,
          EN 61000-4-6 (CS) Level 3,
          EN 61000-4-8,
          EN 61000-4-11
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6 
Warranty
Warranty time: 3 years
Certificates
CE, FCC, RoHS, UL508(pending)

Approx. 9,000 / Piece Get Latest Price

Product Brochure
CAN485 is used for data exchange between CAN-Bus field bus and RS-485 bus interface converter, and supports Modbus RTU protocol. CAN485 interface converter integrated a RS-485 channel and a CAN-Bus channel can be easily embedded using RS-485 interface for communication nodes, do not need to change the original hardware architecture enables the device to obtain the CAN-Bus communication interface, to achieve between the equipments of RS-485 and CAN-Bus network connection and data communication. RS-485 channel CAN485 devices to support a variety of baud rate, the range is 300bps~115200bps. CAN-Bus channel support CiA recommended a variety of standard baud rate and user-defined baud rate, the range of 2.5Kbps~1Mbps. CAN485 interface converter provides three types of data conversion: transparent conversion, encryption conversion and Modbus protocol conversion. Its exterior design supports DIN-Rail mounting and Wall mounting, which is convenient for engineering application. The board comes with a photoelectric isolation module, complete electrical isolation control circuit and CAN-Bus communication circuit, so that the CAN485 converter has a strong anti-interference ability, greatly improving the system in the harsh environment of the use of reliability

Approx. 35,000 / Piece Get Latest Price

Product Brochure

Features

1.Support 10/100M Ethernet
2.Support 16 Port RS-485/422
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and 
  Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication    
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
13.Working temperature: -25～70℃

 Specification

Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: Support TCP Server and Client
Transfer distance: 100m
Connector: RJ45
RS-485/422 port
RS-485/422 port number: 16
RS-422 signal: T+(A), T-(B), R+(A), R-(B),GND
RS-485 signal: D+(A), D-(B), GND
Parity bit: None, Even, Odd, Space, Mark
Data bit; 5bit,6bit,7bit,8bit
Stop bit: 1bit,1.5bit,2bit
Band rate: 300bps～115200bps
Loading: support 32 nodes loop back
Transfer distance: 1200m
Connector:4-bit terminal block
Protection: class 3 static, 1.5KVAC isolation
LED Indicator
Working statue indicator: RUN
Power (PWR)
Ethernet port connection statue (Link)
RS-485/422 port transmit data indicator: TX1~TX16
RS-485/422 port receive data indicator: RX1~RX16
Power requirements
Input Voltage: 85~265VAC/DC
No-load consumption: 8.8W@220VAC
Full-load consumption: 10.1W@220VAC
Mechanical
Shell: IP30 protection, metal shell
Installation: 1U 19” rack mount
Weight: 2500g
Size(L×W×H): 441.6mm×207.9mm×44.6mm 
Environment limits
Working temperature: -25~70℃
Storage temperature: -30~85℃
Relative humidity: 5%~95%（non-condensing）
Standard
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024,
          EN 61000-4-2 (ESD) Level 3,
          EN 61000-4-3 (RS) Level 3,
          EN 61000-4-4 (EFT) Level 4,
          EN 61000-4-5 (Surge) Level 3,
          EN 61000-4-6 (CS) Level 3,
          EN 61000-4-8,
          EN 61000-4-11
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6 
Warranty
Warranty time: 3 years
Certificates
CE, FCC, RoHS, UL508(pending)

Approx. 9,900 / Piece Get Latest Price

Product Brochure

Features

1.Support 10/100M Ethernet
2.Support 2 Port RS-485/422
3.Support WEB and Telnet configuration
4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
5.Support TCP Server, TCP Client, TCP Auto, UDP and
Real COM driver working mode
6.Support UDP multicast and UDP subnet mode
7.Support heartbeat time and time over disconnect function
8.Support cross-gateway and cross-router communication
9.Support virtual serial COM port access and Network interruption automatic recovery
10.Provide Windows configuration tools for easy to use, easy to bath install.
11.Industrial grade design, IP30 protection grade
12.No fan, low consumption design
13.Working temperature: -40～85℃

Specification

Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support TCP, UDP, APR, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: Support TCP Server and Client
Transfer distance: 100m
Connector: RJ45
RS-485/422 port
RS-485 /422 port number: 2
RS-485 signal: D+, D-, GND
RS-422 signal: T+, T-, GND, R+, R-
Parity bit: None, Even, Odd, Space, Mark
Data bit; 5bit,6bit,7bit,8bit
Stop bit: 1bit,1.5bit,2bit
Band rate: 300bps～115200bps
Loading: support 32 nodes loop back
Transfer distance: 1200m
Connector: terminal block
Protection: class 3 static, 1.5KV isolation
LED Indicator
Power (PWR)
Ethernet port connect statue (Link)
RS-485/422 port data indicator: TX, RX
Power supply
Input voltage: 12VDC(9~48VDC)
No-load consumption:0.89W@12VDC
Full-load consumption: 0.93W@12VDC
Environment limits
Working temperature: -40~85℃
Storage temperature: -40~85℃
Relative humidity: 5%~95%（non-condensing）
Mechanical
Shell: IP30 protection, metal shell
Installation: Wall mounting
Weight: 238.6g
Size (L×W×H): 100mm×69mm×22mm
Standard
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8,
EN 61000-4-11
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty
Warranty time: 3 years
Certificates
CE, FCC, RoHS, UL508(pending)