Mootrack Systems
Mootrack Systems
Madiwala, Bengaluru, Karnataka
Send E-mail
Send SMS

Serial Port Converter


We are leading in manufacturing and supplier of Serial port Converters in Chennai, Tamilnadu, India.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 2,000 / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Interface TypeUSB
Communication Indicator TypeUSB
Power (W) No power supply needed, plug and play
Temperature (deg. Celsius) -25 to 85deg
Output TypeYes
Connector TypeDB9
Model NumberUSB232
Weight (kg) 70g
Speed (Mbps)115200
Humidity (%)Relative humidity 5% to 95%
Warranty3Years
Voltage (V)9VDC
Number Of Ports1
Storage Temperature (deg. Celsius)-40deg to 85deg
StandardEIA RS232 standard
ApprovalRohs, Fcc, CE
Model NameModelUSB232
Signal IsolationOptical isolation 2500V
ESD Protection (kV)15KV
Baud Rate300 to 115200bps
Supported OSyes
ColorWhite
BrandMootek
Size (mm)70mmx35mmx18mm(wiring 1.5m)
MaterialIron(metal)
Cable Speed12Mbps(full-speed)
Dimensions 70mmx35mmx18mm(wiring 1.5m)
Operating Temperature-10 to 60 deg
Usb Baud Rates 300bps to 115.2Kbps
Spread Spectrum TechnologyNone
Data Rate300bps to 115.2Kbps
Isolated ConverterYes

We are leading in manufacturing and supplier of USB to RS485/422 Converter in Chennai,Tamilnadu,India.
Introduction:
USB485 is a kind of USB to RS-485/422 industrial intelligent converter. It is the best solution for the communication between USB and RS-485/422. Compared with RS-232 to RS-485/422 converter, USB to RS-485/422 converter has many advantages.

Features:
1. Small volume, easy installation
2. No power supply needed, plug and play
3. Single chip(ASIC) USB port to serial port communication
4. Transmit distance reach up to 1800M at the rate of 115200bps.
5. Automatic send data control, auto distinguish and sense direction adopt data transfer
6. Auto sense serial signal rate, zero delay automatic transmit

Specifications:
USB

Compliance: USB1.1/2.0 compliant
Connector: USB type A
Speed: 12Mbps(Full-speed USB)

Serial interface
Numbers of ports: 1
Serial standards: RS485/422
Connector: DB9 male
Serial Line protection
ESD Protection: 15KV embedded

Performance
Baud rate: 300bps to 230400bps
Serial Communication Parameters
Data Bites: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
FIFO: 128bytes

Serial Signals
RS-485: D+,D-,GND
RS-422: T+, R+, T-, R-,GND
Loading: 32 nodes or custom 128 nodes
Transmission: RS-485 1800M(115200bps), USB 5M

Driver Support
Operating System: Support Windows98/ME and Windows2000/XP,Windows Server 2003/2008, Windows 7/Vista

Physical Characteristics
Weight: Products only: 70g
Packaged: 120g
Dimension: 70mm×35mm×18mm(wiring 1.5m)

Environment
Working temperature: -10 to 60
Storage temperature: -25 to 85
Humidity: Relative humidity 5% to 95%

Power requirements
No power supply needed, powered from USB
Consumption: Static consumption less than 80mA, dynamic average consumption less than 150mA

Warranty: 5 years
Approvals: FCC, CE, RoHS approvals



Additional Information:
  • Item Code: MT1234
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: CHENNAI
  • Production Capacity: 1000
  • Delivery Time: Immediately
  • Packaging Details: USB cables,Warranty card

Yes! I am Interested
View PDF


REQUEST CALLBACK
Get Best Quote

Approx. Rs 3,700 / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Power Input9V~40V
ColorWHITE
BrandMootek
MaterialPLASTIC
Flow ControlYES
Gross Weight230G

We are leading in manufacturing and supplier of RS232 Isolation Protector in Chennai,Tamilnadu,India.
Introduction:
  • Product Details

HJ-485/422/232 is a RS-232/RS-485/RS-422 serial fiber MODEM. Uses industry-standard design, its wall-mounted design support DIN-rail standard rail mounting, easy to install. HJ-485 / 422/232 serial RS-232/RS-485/RS-422 able to provide end to end transparent transmission due to use of optical fiber transmission, there is no electrical conductivity, which has a strong anti-interference ability, not effected by high voltage and lightning.

Product Features :

  • can be HJ-485/422/232 MM or HJ-485/422/232 SM
  • zero delay automatic forwarding
  • Support RS232/485/422
  • automatically detect serial rate, identification and control Data transfer direction
  • Operating wavelength: 1310nm
  • maximum communication rate 500Kbps
  • multimode ST / SC interface Optional, single mode FC / SC / ST Interface optional
  • multimode communication up to 2 km, singlemode reach 20/40/60/80 km
  • interface provides 1500W surge protection, 15KV ESD protection
  • internal or external power supply optional

Communication:

Standard

Comply with EIA RS-232, RS-485 standard

RS-232 signals

IN, OUT, GND

RS-485 signal

D +, D-, GND

RS-422 signal

R +, R-, T +, T-, GND

Optical signal

IN, OUT

Work

Asynchronous, point

Direction control

Using data flow control technology, automatic identification and control data transfer direction

Baud Rate

0-500Kbps, automatic detection signal rate

Optical wavelength

1310nm

Electrical port transmission distance

RS-232 port 15 m, RS-485/422 port 1200 m

Optical transmission distance

multimode 2 km, single mode 20 km

Environmental:

Operating Temperature

-25 °c to 70 °c

Storage Temperature

-40 °c to 85 °c

Humidity

Relative humidity 5% to 95%

Appearance

Length × width × height

100mm × 69mm × 22mm

Shell

Hulled

Color

White

Weight

230g

Power supply

Input Power

9V ~ 40V wide voltage input

Power consumption

2W



Additional Information:
  • Production Capacity: 1000/MONTH
  • Delivery Time: IMEDIATELY
  • Packaging Details: POWER ADAPTER

Yes! I am Interested


Get Best Quote

Approx. Rs 1,500 / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Power SupplyNO EXTERNAL POWER REQUIRED
Distance1.2KM
ColorWHITE
BrandMootek
MaterialPLASTIC

We are leading in manufacturing and supplier of RS232 to RS485 Converter Port Powered in Chennai,Tamilnadu,India.
Introduction:
The TLC485 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.
Features:
1. Port-powered from RS232 port (TXD,RTS,DTR): no external power is necessary
2. Convert RS-232(TXD,RXD signal) to RS-485 signal
3. Plug-and-Play (hot-pluggable, Data format Auto-sensing Self-adjusting)
4. Data direction auto-turnaround, no flow control is required
5. Point to multi point, support 128 nodes loopback
Specification:
Standards: EIA RS-232C, RS-485 standard
RS-232 signal: TX, RX, GND
RS-485 signal: D+, D-, GND
Working mode: Asynchronism, point to point, 4 wire full-duplex
Transfer rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
Flow control: Data direction auto-turnaround, no flow control is required
Max number of drops: 128 nodes
Transfer distance: RS-485side: 1.2Km
RS-232 side: no less than 5m
Port protect: 1500W surge protection,15KV ESD protection
Connector: RS-232 side DB9 female
RS-485 side DB9M( DB9F to 3 bit terminal block)
Power
Power input: No power supply need, powered from RS-232 port TXD, RTS, DTR Consumption: Static less than 10mA, dynamic less than 40mA

Environment
Operating temperature: -20°C to 60°C
Storage temperature: -40°C to 85°C
Humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 90.0mm×33.0mm×16.5mm(DB9)
Material: Plastic(shell)
Weight: 40g



Additional Information:
  • Production Capacity: 1000/MONTH
  • Delivery Time: IMEDIATELY

Yes! I am Interested


Get Best Quote

Approx. Rs 3,999 / piece Get Latest Price

Product Details:
ColorBlack
BrandMootek

Model : Model1200The Media Converter complies with IEEE802.3, IEEE802.3u, IEEE802.3x Standards. It is designed to convert data signal between 10/100 Base-TX and 100Base-FX fast Ethernet. It supports 10/100Base-TX and 100Base-FX applications. The data signal converted by such high performance media converter can be transmitted up to 120Km maximum by fiber-optical cable. The Converter is equipped one optic port and two RJ45 Jacks and one external power supply receptacle. Four LED indicators are built-in for easy diagnosing and monitoring the status of. It can be configured automatically for Full Duplex or Half Duplex operation.

    Features

    1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
    2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
    3. Supports full /half duplex, Point-to-point transparent transfer
    4. Power External 5VDC input
    5. Plug-and-play, easy to installation
    6. Can insert to 2U 19", 14 slots Rackmount

     Specification

    Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
    RJ45 port rate: 10/100Mbps auto negotiation
    Optic port rate: 100Mbps 
    Working: Asynchronous, point to point
    Transfer distance: RJ45port: 100m
                                  Fiber optic:20,40,60,80,100,120km(SM), 2 km(MM) optional
    RJ45 port cable: UTP 5E 
    Fiber connector: SC, ST, FC optional
    Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
                                      Muti-Mode:50/125,62.5/125 um
    Wavelength:850nm,1310nm,1550nm
    Power
    Power supply: External 5VDC input
    Consumption: 4W
    Environment
    Operating temp:-20°C to 75°C
    Storage temperature: -20 to 70°C
    Operating humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 94.0×71.0×26.0mm(external power supply)   
    Shell: Iron 
    Color: White
    Weight: 230g(external power supply)



Additional Information:
  • Production Capacity: 1000/MONTH
  • Delivery Time: IMMEDIATELY

Yes! I am Interested


Get Best Quote

Approx. Rs 3,499 / Piece Get Latest Price

Product Details:
BrandMootek

We are leading in manufacturing and supplier of Isolation RS232/485/422 Converter and Repeater in Chennai,Tamilnadu,India.

Product Description Products Content: 
SW485GI/R is a high performance, more function RS-485/RS-422 interface repeaters. The product configure out connect power, optic-electrical isolation more than 3KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, it is an interface convert product that have good between performances to price. Adopt itself adept interface technique, no use for setup switch 

Features
1. DIN-rail mount 
2. Terminal block, 5-40VAC
3. 3000V isolation 
4. Transmit distance reach up to 1800M at the rate of 9. 6kbps
5. Adopt DIPswitch setup, random switch RS-485/RS-422 interface
6. Automatic send data control, auto distinguish and sense direction about data Transfer 
7. Auto sense serial signal rate, zero delay automatic transmit

Communication
Standard Support EIA RS-485, RS-422 standard
RS-485 signal D+, D-, GND
RS-422 signal R+, R-, T+, T-, GND
Working format Asynchronism, point to point or multi-point, 2 line half duplex, 4 line duplex
Direction Automatic Send Data Control-no software drivers needs
Band rate 300-115200bps, automatic test signal rate
Loading Support 32 port loop environment(or hand tailor 128 point)
Transmission Each port 1800m(9600bps)
Protection 600W surge protection, 15KV static electricity protection
Opto-electronic isolation 3000V
Connector RS-485 port 3 industrial terminal block, RS-422 port 5 industrial term ail block

Environment
Working temperature: -40 to 80
Storage temperature: -40 to 85
Humidity Relative humidity 5% to 95%

Additional Information:
  • Production Capacity: 1000/MONTH
  • Delivery Time: IMMEDIATELY

Yes! I am Interested


 






Corporate Brochure




 

 

Send SMS
Mootrack Systems
Manikandan D  (Managing Director)
No. 1, 1st Cross, Madiwala Extension, Bangalore Urban 1st Cross
Bengaluru - 560068 , Karnataka , India
Send E-mail
Share Us:
X